| These specifications describe a self-contained patch unit, which is a “slide in”, unit to be used for patching with hot asphalt. Vendor must supply at time of bid 10 users of identical sales, to be considered a responsible bidder. Unit shall include a 5 year warranty.
CONTAINER
The unit shall be 3 cubic yards
Double wall constructed.
2" - 6 lb. density insulation throughout.
10 GA HR steel interior sides, 12 GA HR steel exterior.
The floor shall be 1/4 inch HR steel.
Interior walls of loading lids have expansion corrugations.
Top loading doors are 2" double wall constructed.
Flame cut upper pivot arms for top lids.
All doors hydraulically operate by 2" x 11" stroke cylinders.
Material funneled to center of container.
Hydraulic controls located at right rear corner.
Hydraulic controls located at the right rear corner.
Width of box is 74" O.D.
Length of box is 132" O.D.
Patcher is designed to fit into 10 ft. Dump Body.
LOADING AND UNLOADING
Patcher shall have freestanding legs.
Shall be loaded and unloaded from the truck dump body without ancillary equipment.
SHOVELING APRON - MODEL 10
Constructed of 10 GA HR steel.
Folding bottom for material to bypass freely.
Mounted on rear of container.
1/4 cubic yard capacity.
OPTIONAL EQUIPMENT
MOUNTING
Sprayer shall be mounted in front of Patcher body
PUMP
Rotary gear pump.
Output of 10 gallons per minute of 600 R.P.M.
Pump shall be hydraulic driven.
All valves shall be high pressure.
It shall be remote mounted for ease of maintenance.
Mechanically actuated from the right rear of the body.
Pump shall be reversible to draw material back to tank.
Pump shall be driven by a torque motor, which has 5.9
SPRAY WAND AND HOSE
System should be plumped to curbside rear of truck.
3/8 inch diameter 5 feet long steel application wand shall be supplied.
25 feet of 1/2 inch diameter oil resistant hose.
A brass changeable nozzle at spray tip.
Wand storage brackets.
AUXILIARY ELECTRIC HEAT PATCHER
Low-density electric heat.
Minimum 6KW, 240 VAC thermostatically controlled.
100°F to 300°F.
Weatherproof Panel.
Overnight heating of asphalt.
HOSE REELS
Emulsion spray hose reel.
Hand torch hose reel.
Solvent hose reel.
All reels are designed to accommodate 25 foot hoses.
ARROWBOARD
(10) Light board.
Arrow - left, right, or both.
Mounted at rear of unit.
THERMOMETER
0 - 300°F
FIRE EXTINGUISHER
5 lbs., 10 lbs.
STROBE LIGHTS & BEACONS
RE-EMULSIFYING SYSTEM
HYDRAULIC TOOL CIRCUIT
AIR PRESSURE TYPE EMULSION SPRAY SYSTEMS
|
