| These specifications describe a trailer mounted hot patch unit which is to be used for patching with hot asphalt or heated cold mix.
CONTAINER
The unit shall be 3 cubic yard - 4 ton capacity.
Double wall construction.
10 GA interior, 12 GA exterior.
2" - 6 lb. density insulation throughout, including rear and top doors.
Top loading doors shall be manually operated.
Two rear shoveling doors shall be manually operated.
A rigid shoveling apron shall be mounted at the rear, the width of the rear doors.
Shoveling apron shall be heated.
Container is to discharge by means of a sloping floor.
Floor shall be 1/4 inch steel plate.
The floor shall be on a 60° angle and slope rearward.
HEATING SYSTEM
Shall be a single 60,000 BTU burner.
Propane gas vapor fuel with high limit shut off.
It shall be equipped with a 100°F -300°F thermostat.
There shall be a 100% shut off valve, controlled by a flame sensing thermocouple.
Heated air will circulate around load by means of ductwork and passageways. Unit shall include a 0° - 300°F thermometer.
Unit to be equipped with 2 - 100 lb. (25 gal) LPG tanks.
TRAILER
Shall be 6" channel construction, single tire, leaf spring, and tandem axle.
It shall have electric brakes all four wheels.
Chassis will have a 12,000-lb. GVW rating, with formed fenders.
3" towing eye.
2000 lb. top wind folding front tongue jack.
2 safety chains.
ICC lighting.
At the front and under Patcher body shall be a storage area for shovel, lutes,
rakes and small hand tools.
Unit to be painted standard black.
OPTIONS
* Electric 240 VAC for overnight heating
* Emulsion or Cutback Sprayer for tack oil PS 60 50/10 Diesel
* Waste oil/flushing tank
* Hand Torch with 25 ft. hose
* Surge Brakes
* Suck Back
* Hydraulic system for top & rear doors.
|
