| These specifications describe a trailer mounted emulsion and cutback sprayer.
TANK
Round Cross section, 200 gallon.
ASME Construction 125 PSI.
6" Fill Opening hinged.
2" Drain plug.
10 Gallon Waste Recovery Tank.
Y Strainer on discharge.
Basket Strainer in Fill Opening.
Safety Air Exhaust Valve.
Safety Pressure Valve.
Pressure Regulators & Gauges.
Air Blow Out for Cleaning.
ENGINE
Four Cycle, 5 HP @ 3600 RPM.
Equipped with Throttle Control.
Centrifugal Clutch and Reduction.
PUMP
12 CFM Displacement.
2 Cylinder, Air Cooled, Single Stage.
Air Unloader.
LPG HEATER
4" Heat Tube full length of Tank.
LPG Fueled.
150,000 BTU Burner with outfire protector.
8-Gallon Fuel Tank with Regulator.
50°F - 500°F Thermometer.
HAND SPRAY
25-ft 1/2 inch Hose.
5 ft Wand with Shut off Valve.
TRAILER
4" Channel Frame.
3,500 lb. Rated Capacity.
Springs 3,200 lb. Rated Capacity.
Tires 6.70 X 15 Rated Capacity.
Retractable Frame Jack.
Heavy Duty Fenders.
ICC Lighting.
Safety Chain.
2" Ball Hitch.
OPTIONAL EQUIPMENT
* Brakes - Electric or Hydraulic.
* Pintle Hitch or Ball.
* Electric Auxiliary Heater.
* LPG Engine.
* Lockage Engine & Cover.
* Electric Start Engine.
* 6 ft. Spray Bar.
* Hand Torch.
* Spray Hose Reel.
* Dual Spray Hose & Wand - Air/Material.
* 10-Gallon Solvent Tank.
|
