| These specifications describe a Trailer Mounted Emulsion and Cutback Sprayer.
TANK
Round Cross section, 200 gallon.
10 GA HR Steel Shell, 10 GA HR Steel flanged ends.
6" Fill Opening hinged.
2" Drain plug.
6 Gallon Tank for Flushing.
10 Gallon Waste Recovery Tank.
Re-Circulation.
Basket Strainer in Fill Opening.
Y Strainer on Discharge.
ENGINE
Four Cycle, 5.5 HP @ 3600 RPM., B/S Engine
Engine shall be converted to a LPG fueled
Lockable Engine/Pump Cover
Equipped with Throttle Control.
Centrifugal Clutch and Reduction.
PUMP
12 GPM @ 1200 RPM
Rotary Pump with Relief Valve.
1" Inlet and Outlet.
LPG HEATER
4" Heat tube full length of Tank.
LPG Fueled.
150,000 BTU burner with outfire protector.
8 Gallon Fuel Tank with Regulator.
50°F - 500°F Thermometer.
HAND SPRAY
25 feet 1/2 inch Hose.
5 foot Wand with Shut off Valve.
TRAILER
4" Channel Frame.
3,000 lb. Rated Capacity.
Springs 3,000 lb. Rated Capacity.
Tires 6.70 x 15 Rated Capacity.
Retractable Frame Jack.
Heavy Duty Fenders
ICC lighting
Safety Chain
OPTIONAL EQUIPMENT
Pintle Hitch or Ball.
Spray Hose Reel.
Auxiliary Electric Heat System
Insulated Emulsion Tank
Honda engine 5 HP
Five Nozzle Spray Bar
Eight Nozzle Spray Bar
Thirteen Nozzle Spray Bar
Spare Tire and Wheel
Electric Brakes
Surge Brakes
|
